The Journaling of Overgaard 868
Subtitle
Blog
The A - Z Of J-Mount
|
|
When using a Focusrite J-Mount, you get all the power of a mike right. This lets you mix down loud but get in charge of the sound coming from your headphones, your computer and your hardware. The DAW interface can be designed to compliment the J-Mount, and provide a seamless interface between it and your studio. Gain chain choices to take advantage of your setup and you'll need to be certain you have the mic although it's the easiest way to send a signal to a single microphone.
Preamps are an important part of a signal chain. You may not know that, but a'standard' cable isn't enough for preamps. A'Preamp out' cable is your first step, allowing you to connect your audio out (such as your notebook or desktop) to your preamp. Alternatively, you could run out the audio .
Make sure you pick a mic with a floating element. This lets you set the level at in addition to the level of any'evaporating' effects. Make certain that the preamp has this as well, For those who have a DI or USB interface. You can also look at making this a headphone that is balanced out, instead of a computer line out. Another aspect to consider is if leave it high or you would like to decrease at the level where the signal enters the interface.
Make certain you choose a mic, to prevent switching between mics. This is especially important if you're recording instruments or voices. An option for recording is to link at the end of the DI cable, so that you have a zero dB signal from the DI back.
If you are recording the input to your guitar amp (or house audio amp) and are using XLR cables, be sure that you have a stereo extension cable (not a mic cable). This is essential if you're recording to an amplifier. For those who are recording to a sound card, make sure you have the stereo 'Analog Out' connector for recording.
You can have a portable recorder (with a USB port) and connect it to your Audio Interface, using a USB to RCA adaptor. This permits you to connect to the interface without the microphone, if you will need to attain a vintage sound, adding a tiny bit of distortion as well as giving you access to this level and preamp levels.
There are many ways that to take advantage of the J-Mount Interface as you can see. Follow these steps, and you will be well on your way to recording.
Preamps are an important part of a signal chain. You may not know that, but a'standard' cable isn't enough for preamps. A'Preamp out' cable is your first step, allowing you to connect your audio out (such as your notebook or desktop) to your preamp. Alternatively, you could run out the audio .
Make sure you pick a mic with a floating element. This lets you set the level at in addition to the level of any'evaporating' effects. Make certain that the preamp has this as well, For those who have a DI or USB interface. You can also look at making this a headphone that is balanced out, instead of a computer line out. Another aspect to consider is if leave it high or you would like to decrease at the level where the signal enters the interface.
Make certain you choose a mic, to prevent switching between mics. This is especially important if you're recording instruments or voices. An option for recording is to link at the end of the DI cable, so that you have a zero dB signal from the DI back.
If you are recording the input to your guitar amp (or house audio amp) and are using XLR cables, be sure that you have a stereo extension cable (not a mic cable). This is essential if you're recording to an amplifier. For those who are recording to a sound card, make sure you have the stereo 'Analog Out' connector for recording.
You can have a portable recorder (with a USB port) and connect it to your Audio Interface, using a USB to RCA adaptor. This permits you to connect to the interface without the microphone, if you will need to attain a vintage sound, adding a tiny bit of distortion as well as giving you access to this level and preamp levels.
There are many ways that to take advantage of the J-Mount Interface as you can see. Follow these steps, and you will be well on your way to recording.
Categories: None
Post a Comment
Oops!
The words you entered did not match the given text. Please try again.
Oops!
Oops, you forgot something.