The Journaling of Overgaard 868
Subtitle
Blog
The J-Mount Mystery
|
|
You get all the power of a microphone right when using a Focusrite J-Mount. This lets you mix down loud but get in charge of the sound coming out of your cans, your computer and your hardware. The complete DAW interface can be designed to compliment the J-Mount, and provide a seamless interface between it and your studio. Gain chain choices to make the most of your setup and you'll have to make certain you have the best mic although it's the easiest way to send a signal to one microphone.
Preamps are a valuable part of a signal chain. You may not know this, but a'standard' RCA cable is not enough for preamps. A'Preamp out' cable is the first step, allowing you to connect your audio out (such as your laptop or desktop) to your preamp. You can run out the audio on your keyboard.
Be What You Should Do To Find Out About J-Mount Before You're Left Behind pick a mic with a floating element. This enables you to set the level where you record, as well as the level of any'evaporating' effects. Be certain that the preamp has this too if you have a DI or USB interface. Ten Ways To Avoid J-Mount Burnout can also look at making this a headphone out, rather than a computer line out. Seven Ways To Master J-Mount Without Breaking A Sweat to consider is if you would like to decrease at the level at which the signal enters the sound port or leave it high.
Ensure that you choose a mono mic, to reduce switching between mics. This is particularly important if you're recording voices or instruments. An additional option for recording is to connect at the end of the DI cable, so that you have a zero dB signal from the DI back.
If you are recording the input to your guitar amp (or house piano amp) and are using XLR cables, be certain you have a stereo extension cable (not a mic cable). This is essential if you're recording to an amplifier. For those who are recording to a card, be sure that you have the stereo 'Analog Out' connector for recording.
You can take a portable recorder (with a USB port) and connect it to your Audio Interface, with a USB to RCA adaptor. This allows you to connect without the mic, giving you access to the level and preamp levels in addition to adding a little bit of distortion should you need to achieve a vintage sound.
There are numerous ways in which to make the most of the J-Mount Interface as you can see. Follow these steps, and you will be well on your way to recording.
Preamps are a valuable part of a signal chain. You may not know this, but a'standard' RCA cable is not enough for preamps. A'Preamp out' cable is the first step, allowing you to connect your audio out (such as your laptop or desktop) to your preamp. You can run out the audio on your keyboard.
Be What You Should Do To Find Out About J-Mount Before You're Left Behind pick a mic with a floating element. This enables you to set the level where you record, as well as the level of any'evaporating' effects. Be certain that the preamp has this too if you have a DI or USB interface. Ten Ways To Avoid J-Mount Burnout can also look at making this a headphone out, rather than a computer line out. Seven Ways To Master J-Mount Without Breaking A Sweat to consider is if you would like to decrease at the level at which the signal enters the sound port or leave it high.
Ensure that you choose a mono mic, to reduce switching between mics. This is particularly important if you're recording voices or instruments. An additional option for recording is to connect at the end of the DI cable, so that you have a zero dB signal from the DI back.
If you are recording the input to your guitar amp (or house piano amp) and are using XLR cables, be certain you have a stereo extension cable (not a mic cable). This is essential if you're recording to an amplifier. For those who are recording to a card, be sure that you have the stereo 'Analog Out' connector for recording.
You can take a portable recorder (with a USB port) and connect it to your Audio Interface, with a USB to RCA adaptor. This allows you to connect without the mic, giving you access to the level and preamp levels in addition to adding a little bit of distortion should you need to achieve a vintage sound.
There are numerous ways in which to make the most of the J-Mount Interface as you can see. Follow these steps, and you will be well on your way to recording.
Categories: None
Post a Comment
Oops!
The words you entered did not match the given text. Please try again.
Oops!
Oops, you forgot something.